The Storm Water Management Program (SWMP) is a comprehensive program to manage the quality of discharges from the municipal separate storm sewer system (MS4). TxDOT does not utilize a single state-wide SWMP but rather a district-specific SWMP that is based on a standardized plan.
A primary part of this effort is to closely monitor and track the discharge of construction storm water into TxDOT's MS4 system. If you plan to discharge construction storm water into TxDOT's MS4 system, you are required to submit a signed Notice of Intent (NOI) to the proper TxDOT district.
The Texas Commission on Environmental Quality requires that the SWMP must contain a specified number of minimum control measures (MCM). In order to meet each required minimum control measure, TxDOT utilizes best management practices.
Required Minimum Control Measures
A Large or Phase I MS4 Permit is issued to an operator, such as a city or county, who owns or operates storm sewers or storm sewer systems that serve a populations of 100,000 or more.
A Small or Phase II MS4 Permit is issued to an operator, such as a county, university or transportation authority, who owns or operates storm sewers or storm sewer systems that serve populations within urbanized areas.
|MCM No.||Large MS4 MCM||Small MS4 MCM|
|1||MS4 maintenance activities||Public education, outreach and involvement|
|2||Post-construction storm water control measures||Illicit discharge detection and elimination|
|3||Illicit discharges detection and elimination||Construction site storm water runoff control|
|4||Pollution prevention and good housekeeping for municipal operations||Post-construction storm water management in areas of new development and redevelopment|
|5||Industrial and high-risk runoff||Pollution prevention and good housekeeping for municipal operations|
|6||Construction site storm water runoff||Industrial storm water sources|
|7||Public education, outreach, involvement and participation||Authorization for construction activities where the MS4 is the site operator|
|8||Monitoring and screening programs|
Best Management Practices
As referenced above, TxDOT uses best management practices (BMPs) to ensure that each minimum control measure is met and the storm water management program is successful.
Examples of BMPs include
TxDOT utilizes various BMPs applicable to each MCM as displayed below. MCMs coordinate to the table above. The BMP Examples below indicate one of many BMPs TxDOT utilizes. The Implementation column describes how the BMP is implemented to meet each of the respective MCMs. Where additional information is available about a BMP or an implementation plan, it is linked in the table below.
|MS4 Maintenance Activities||Structural Control Maintenance||Inspect structural controls at least once per year. Determine the need for maintenance, repair, or replacement and schedule follow-up actions as necessary.|
|Post-construction Storm Water Control Measures||Permanent Structure||Inspect permanent structural control.|
|Illicit Discharge Detection and Elimination||Update Storm Sewer Outfall Map||Map and screen all outfalls in MS4 areas.|
|Pollution Prevention and Good Housekeeping||Waste Handling||Ensure proper disposal of litter and debris removed from roadways by litter collection and/or street sweeping.
Ensure proper disposal of spoil materials removed during maintenance of drainage ditches and structural controls.
|Industrial and High-risk Runoff||No Industrial or High Risk Facilities are in the Right of Way||Not applicable.|
|Construction Site and Storm Water Runoff||Compliance with the CGP||Develop and implement plan to ensure compliance, and require contractors to comply with the CGP.|
|Public Education, Outreach, Involvement and Participation||Don't Mess with Texas Programs||Continue Don't Mess with Texas programs, which may include Adopt-a-Highway, Campus Cleanup, Road Touch, and trash-off efforts.|
|Monitoring and Screening Programs||Dry Weather Screening
Wet Weather Monitoring
|Utilize Advanced Outfall Tracking System (AOTS).
Perform representative monitoring event or participate in Regional Surfacewater Monitoring Program.
TxDOT invites the public to ask questions about the Storm Water Management Program. Contact us with questions or to request additional information. Information is also available on how you and your family can help prevent storm water pollution.